Bike is an xtz 660 from 1997.
Just realized im missing the washer that is used for rear wheel alignment om right hand Side (behind THE nut with a cotter pin through it).
Number 31 on parts diagram (90201-171T3 alt 90201-177k7). Can anyOne please help me and grab a caliper and get me THE dimensions?
Need the bike tomorrow.
Cheers!
Missing washer rear wheel
-
Mezo
- Dashingly Handsome
- Posts: 6108
- Joined: Wed Mar 23, 2011 11:01 am
- What Bike or Bikes Do You Own?: Kymco agility 125 ;-)
- Previously Owned Bikes: Honda SS50, Suzuki TS50, Honda CB100, Honda CR125RZ, Yamaha YZ125, Kawasaki KX250, Suzuki TL1000S, Ducati 900SS, Ducati 900SL, a few Tenere`s.
- Location: Queensland Australia
- Contact:
Re: Missing washer rear wheel
Well most jap rear axles are either 17mm or 20mm, so get one of each & you should be OK.
Mezo.
Mezo.
"A wise man makes his own decisions, an ignorant man follows public opinion"
-
kissedin
- No Gold Stars Yet
- Posts: 12
- Joined: Wed Nov 11, 2020 4:27 am
- What Bike or Bikes Do You Own?: XTZ 660, f800s, husqvarna mod 28
- Location: SWEDEN
Re: Missing washer rear wheel
I was thinking in terms of thickness and outer diameter. The partnumbers differ from left and right washer so I guess it is kinda important that the dimensions are somewhat near spec.
-
kissedin
- No Gold Stars Yet
- Posts: 12
- Joined: Wed Nov 11, 2020 4:27 am
- What Bike or Bikes Do You Own?: XTZ 660, f800s, husqvarna mod 28
- Location: SWEDEN
Re: Missing washer rear wheel
I ended Up with standard washer while i am waiting for a correct One to arrive.
Now the trip is over. I survived
Now the trip is over. I survived
