Carb tutorial 1993 Tenere 3 AJ

Airbox, Fuelpump, Carburettor
Buchtucker
No Gold Stars Yet
No Gold Stars Yet
Posts: 6
Joined: Wed Mar 25, 2020 12:33 pm
What Bike or Bikes Do You Own?: Tenere xt600z 3aj 1993
Location: Szczecin/ Poland

Re: Carb tutorial 1993 Tenere 3 AJ/ Engine stalls when putting in gear?

Post by Buchtucker »

Thanks for the info. I will try and contact Yamaha to find out the correct year.

Thanks to the Carb tutorial I have now sorted the carb and fitted new fuel hoses with filters. It startet up just fine and idles very nicely to :star:
So I got all excited and wanted to take the beast for a testride :nordie:

However the second I put it in gear, the engine stops! both first and second gear.
Also if I press the starter button when in gear with the clutch pulled, the starter engine does not turn at all?

I think it can be an electrical problem, but electrics is not my strong side.
I did clean all electrical connections, so maby I made a mistake somewhere??

Any suggestions to where I should look for the problem is much appreciated.

Thanks
motorang
Halfway there
Halfway there
Posts: 475
Joined: Wed Sep 07, 2016 10:41 am
What Bike or Bikes Do You Own?: XT600Z 1VJ
Location: Graz, Austria
Contact:

Re: Carb tutorial 1993 Tenere 3 AJ

Post by motorang »

Here you go for the electrical problem. Should be easy to sort out, I described it quite thoroughly.
3AJ has a standard CDI system.
viewtopic.php?f=66&t=3238

If it persists be so kind to open a thread in the Electrical section
viewforum.php?f=45

Andy
Chop your own wood and it will warm you twice (Henry Ford)
motorang
Halfway there
Halfway there
Posts: 475
Joined: Wed Sep 07, 2016 10:41 am
What Bike or Bikes Do You Own?: XT600Z 1VJ
Location: Graz, Austria
Contact:

Re: Carb tutorial 1993 Tenere 3 AJ

Post by motorang »

Mezo wrote: Wed Mar 25, 2020 9:03 pm
Andy (motorang) was talking about translating it to German, not sure if he has done this or not?
Well
you asked me very kindly :D
It is done now
https://www.motorang.com/motorrad/XT600 ... German.pdf

I did store the English one here, too - so you can link to it directly.
https://www.motorang.com/motorrad/XT600 ... nglish.pdf

Andy
Chop your own wood and it will warm you twice (Henry Ford)
User avatar
Mezo
Dashingly Handsome
Dashingly Handsome
Posts: 6108
Joined: Wed Mar 23, 2011 11:01 am
What Bike or Bikes Do You Own?: Kymco agility 125 ;-)
Previously Owned Bikes: Honda SS50, Suzuki TS50, Honda CB100, Honda CR125RZ, Yamaha YZ125, Kawasaki KX250, Suzuki TL1000S, Ducati 900SS, Ducati 900SL, a few Tenere`s.
Location: Queensland Australia
Contact:

Re: Carb tutorial 1993 Tenere 3 AJ

Post by Mezo »

motorang wrote: Mon Apr 06, 2020 6:34 amyou asked me very kindly :D It is done now

https://www.motorang.com/motorrad/XT600 ... German.pdf

I did store the English one here, too - so you can link to it directly.
https://www.motorang.com/motorrad/XT600 ... nglish.pdf

Andy
That's brilliant Andy especially the "von Mezo" i liked that, just need a red tri-plane now.

Problem is my version is to big, when i saved it i must have not compressed it correctly? its to large a file, are you able to open & then re-save it the way you did with the german version to save on bandwidth? my version took ages to view compared to yours.

Cheers,

Mezo.
"A wise man makes his own decisions, an ignorant man follows public opinion"
motorang
Halfway there
Halfway there
Posts: 475
Joined: Wed Sep 07, 2016 10:41 am
What Bike or Bikes Do You Own?: XT600Z 1VJ
Location: Graz, Austria
Contact:

Re: Carb tutorial 1993 Tenere 3 AJ

Post by motorang »

Hi Mezo,
both my versions linked above are around 10 MB.
The one you sent me as an Email attachment on 2020-03-03 is the same size. I think I did not change that, only rename it without blanks for easier linking.

So I do not know what you mean really.

Andy
Chop your own wood and it will warm you twice (Henry Ford)
Post Reply