hi peeps had my white red 3yf nearly a year now and was wondering if anyone knows were i can get a centre stand from only just found jioned site recent keep up the good work guys 
centre stand
-
chilly
- No Gold Stars Yet
- Posts: 2
- Joined: Tue Mar 20, 2012 12:01 am
- What Bike or Bikes Do You Own?: 95 3yf xtz660 tenere kmx200 rd125 dx 78 project 1e7
- Previously Owned Bikes: 02 honda dominatore xt125 r 2005 yamaha rxs 100 88 sprayed purple met yamaha neo s 50
- Location: Taunton, UK
centre stand
hi peeps had my white red 3yf nearly a year now and was wondering if anyone knows were i can get a centre stand from only just found jioned site recent keep up the good work guys -
Chicko
- On the ladder
- Posts: 83
- Joined: Thu Sep 01, 2011 1:04 am
- What Bike or Bikes Do You Own?: 1996 XTZ660 Tenere
1999 Honda VTR1000F - Previously Owned Bikes: Lots mostly Yamaha's
- Location: Some where in the hills
Re: centre stand
I wouldn't mind one of those items myself, scarce as hens teeth tho.
-
Phatboy
- No Gold Stars Yet
- Posts: 47
- Joined: Mon Feb 20, 2012 10:32 am
- What Bike or Bikes Do You Own?: 1988 3AJ Yamaha Tenere xt600z
- Location: Sunshine Coast, Queensland, Australia
Re: centre stand
hey guys is this what your after? http://www.motorcycleadventure.com.au/s ... uct_id=356 Thats here in Oz tho, so shoud be some in your areas as well. Hope that helps ya 
Re: centre stand
I have been keen on getting some center stands, but dont want to pay $250 plus 
I am going to make some for my S10 and also 1vj and 3aj. Like all project only got to the "design phase"!!!
Steel tube, hacksaw,welder, rattle can and your done!!!
You may wish to give it a go? You will most likely get one made before me!
I am going to make some for my S10 and also 1vj and 3aj. Like all project only got to the "design phase"!!!
Steel tube, hacksaw,welder, rattle can and your done!!!
You may wish to give it a go? You will most likely get one made before me!
-
xtzrick
- King of Posting
- Posts: 1051
- Joined: Sun Apr 17, 2011 3:41 pm
- What Bike or Bikes Do You Own?: '97 Yamaha XTZ660 Tenere, '79 Suzuki GS750
- Previously Owned Bikes: Yamaha RS125, Suzuki GT125, Suzuki GT185, Honda CB250 G5,Kawasaki Z1000J, Kawasaki KL250, Yamaha TZR125, Yamaha XT600E
- Location: Socialist Republic of S.Yorks.
Re: centre stand
The link Phatboy posted is for the new 660s & won't fit the 3YF !
Hepco Becker or SW-motech used to make them but no longer list them on their sites, they might have old stock, you could try contacting them.
They were expensive
more than a 2nd hand MIG welder & a length of steel tube.
Rick
Hepco Becker or SW-motech used to make them but no longer list them on their sites, they might have old stock, you could try contacting them.
They were expensive
more than a 2nd hand MIG welder & a length of steel tube.Rick
-
Mezo
- Dashingly Handsome
- Posts: 6108
- Joined: Wed Mar 23, 2011 11:01 am
- What Bike or Bikes Do You Own?: Kymco agility 125 ;-)
- Previously Owned Bikes: Honda SS50, Suzuki TS50, Honda CB100, Honda CR125RZ, Yamaha YZ125, Kawasaki KX250, Suzuki TL1000S, Ducati 900SS, Ducati 900SL, a few Tenere`s.
- Location: Queensland Australia
- Contact:
Re: centre stand
They come up on ebay germany now & then, ive seen three this year.
Mezo.
Mezo.
"A wise man makes his own decisions, an ignorant man follows public opinion"
-
Edgar
- No Gold Stars Yet
- Posts: 41
- Joined: Fri Apr 15, 2011 3:25 pm
- What Bike or Bikes Do You Own?: Unknown
- Location: Portugal
Re: centre stand
Hello 
I put a center stand of the SW-Motech
http://vadiodaxt.blogspot.pt/2012/03/de ... otech.html
is very good
I am very pleased with it
Edgar
I put a center stand of the SW-Motech
http://vadiodaxt.blogspot.pt/2012/03/de ... otech.html
is very good
I am very pleased with it
Edgar
-
Chicko
- On the ladder
- Posts: 83
- Joined: Thu Sep 01, 2011 1:04 am
- What Bike or Bikes Do You Own?: 1996 XTZ660 Tenere
1999 Honda VTR1000F - Previously Owned Bikes: Lots mostly Yamaha's
- Location: Some where in the hills
Re: centre stand
Looks good Edgar thanks for the linkEdgar wrote:Hello
I put a center stand of the SW-Motech
http://vadiodaxt.blogspot.pt/2012/03/de ... otech.html
is very good
I am very pleased with it
Edgar
-
velja
- No Gold Stars Yet
- Posts: 42
- Joined: Sat Dec 10, 2011 7:49 pm
- What Bike or Bikes Do You Own?: XTZ 660 1993.
- Previously Owned Bikes: Honda CB 500 1998, Sachs X-ROAD,
- Location: Serbia
Re: centre stand
I know its little of topic but I saw this on internet and I am creating one for myself. Should be good for lubricating the chain.
http://www.youtube.com/watch?v=77w0SlhX ... r_embedded
*I am not advertising. I have nothing with guy from video. I just saw it on other forum and thought it is nice idea.
http://www.youtube.com/watch?v=77w0SlhX ... r_embedded
*I am not advertising. I have nothing with guy from video. I just saw it on other forum and thought it is nice idea.
-
Edgar
- No Gold Stars Yet
- Posts: 41
- Joined: Fri Apr 15, 2011 3:25 pm
- What Bike or Bikes Do You Own?: Unknown
- Location: Portugal
Re: centre stand
velja wrote:I know its little of topic but I saw this on internet and I am creating one for myself. Should be good for lubricating the chain.
http://www.youtube.com/watch?v=77w0SlhX ... r_embedded
*I am not advertising. I have nothing with guy from video. I just saw it on other forum and thought it is nice idea.
another
but this can easily be improvised
http://www.youtube.com/watch?v=5PfLdXz3rtA
pulling this angle
lifting the front wheel
pulling this angle
lifting the rear wheel
