Hello all,
Would you guys know the proper routing for the wiring bundle behind the headlight on the 43F XT600?
I tried a different way but don't seem to work out at all and on clymers manual they didn't illustrate about it. Any help would be great thanks.
Jack.
43F XT600 wiring bundle routing behind headlight
-
Team_Yamaha50
- No Gold Stars Yet
- Posts: 17
- Joined: Tue Apr 16, 2019 6:21 am
- What Bike or Bikes Do You Own?: 1984 Yamaha XT600
- Location: Canberra
-
Mezo
- Dashingly Handsome
- Posts: 6108
- Joined: Wed Mar 23, 2011 11:01 am
- What Bike or Bikes Do You Own?: Kymco agility 125 ;-)
- Previously Owned Bikes: Honda SS50, Suzuki TS50, Honda CB100, Honda CR125RZ, Yamaha YZ125, Kawasaki KX250, Suzuki TL1000S, Ducati 900SS, Ducati 900SL, a few Tenere`s.
- Location: Queensland Australia
- Contact:
Re: 43F XT600 wiring bundle routing behind headlight
IF you can find an OEM service manual for the 43F they all show cable routing.
EDIT: Hang on, this has been asked before HERE now i scanned an XT600 diagram by mistake which means i have it somewhere.
Mezo.
EDIT: Hang on, this has been asked before HERE now i scanned an XT600 diagram by mistake which means i have it somewhere.
Mezo.
"A wise man makes his own decisions, an ignorant man follows public opinion"
-
Team_Yamaha50
- No Gold Stars Yet
- Posts: 17
- Joined: Tue Apr 16, 2019 6:21 am
- What Bike or Bikes Do You Own?: 1984 Yamaha XT600
- Location: Canberra
Re: 43F XT600 wiring bundle routing behind headlight
Hello Mezo,
I have a clymer manual however it's useless when comes to wiring routing
It would be great if you could scan me the wiring routing page on the OEM service manual please
Jack.
-
Mezo
- Dashingly Handsome
- Posts: 6108
- Joined: Wed Mar 23, 2011 11:01 am
- What Bike or Bikes Do You Own?: Kymco agility 125 ;-)
- Previously Owned Bikes: Honda SS50, Suzuki TS50, Honda CB100, Honda CR125RZ, Yamaha YZ125, Kawasaki KX250, Suzuki TL1000S, Ducati 900SS, Ducati 900SL, a few Tenere`s.
- Location: Queensland Australia
- Contact:
Re: 43F XT600 wiring bundle routing behind headlight
This is for a 34L & id guess its the same as a 43F, did you see on the link where the main loom goes under the bottom yoke? sandwiched between that & the mudguard?
Page 77.
Page 78
Page 79
This took me bloody ages to do with a phone camera, my scanner shit itself years ago.
Lucky its sunday arvo & fark all`s on telly.
Mezo.
Page 77.
Page 78
Page 79
This took me bloody ages to do with a phone camera, my scanner shit itself years ago.
Lucky its sunday arvo & fark all`s on telly.
Mezo.
"A wise man makes his own decisions, an ignorant man follows public opinion"
-
Team_Yamaha50
- No Gold Stars Yet
- Posts: 17
- Joined: Tue Apr 16, 2019 6:21 am
- What Bike or Bikes Do You Own?: 1984 Yamaha XT600
- Location: Canberra
Re: 43F XT600 wiring bundle routing behind headlight
Hello Mezo,
Thanks mate i truly appreciate your effort on trying to help me
This has cleared up all my confusions and now i can just go ahead and tidy up the wiring loom so it no longer binds. Thanks again. 
Jack.
Thanks mate i truly appreciate your effort on trying to help me
This has cleared up all my confusions and now i can just go ahead and tidy up the wiring loom so it no longer binds. Thanks again. Jack.
-
charliext1vj
- Halfway there
- Posts: 321
- Joined: Sun Mar 29, 2015 11:12 am
- What Bike or Bikes Do You Own?: 2 XT600s -1VJ, BSA Bantam Trail, CRF1000, BSA B25 if I can find all the bits!
- Previously Owned Bikes: too many to list - XT600s, cr500, KTM 990 Adv, VFR800, RDs, DTs
- Location: Bath, UK
Re: 43F XT600 wiring bundle routing behind headlight
Cracking job by Mezo - Jack just remember not to over do the loom tape and heat shrink...I over did mine which resulted in the loom not being flexible enough when trying to put headlight back in.