WIDE STAINLESS STEEL FOOTPEGS YAMAHA, HONDA, KTM, HUSQVARNA

[bosley1980]

Footpegs for XTZ750 Super tenere done.
How you like it?



photos on bike coming soon or user post here itself. Right Wy'east?

[bosley1980]

HERE IS PROTOTYPE Footpegs for Honda XRV750 Africa Twin.

Lower -40mm

HERE IS RESULT from customer

[Wy'east]

The XTZ750 one looks good. I'm now waiting impatiently for the set to show up. Should have some pics up by next week hopefully if I can manage to install them.

Just for the XTZ crowd, I had Radan go with the design where I put the front edge of the peg 7,5mm/7.5mm closer to the pedals. This shouldn't be too noticeable while sitting and riding but standing and riding along with the wider/longer base should make it ideal (or at least in my mind). We shall see...

Sorry I was off-line and ceased all communiques - email and other-wise. I have a herniated disc in my lower back and was in the hospital for a few days.

[Wy'east]

XTZ750 Pegs...

Ok, I got the pegs from Radan and they are almost too good to put on the bike. Installing them depends on the condition of your bike,one side went on very well took about 5 minutes and the other side was a bit of a hassle. If my bike was new it would have gone in about 5 minutes too. My problem was that after I've dumped the bike in the "dirt" so many times I slightly bent the mount point, unbeknownst to me. I had to tweek the tangs on the bike a few times and then the peg slipped in ok. This not a problem with the peg but with the bike.

I will post some pictures but I need to get them hosted.

Another thing I never noticed on the XTZ, the pegs are positioned at a slight upward angle. You can see this if you look from the back of the bike. It is probably more pronounced because the these pegs are shiny SS and longer also in addition they are angled back slightly, viewable from above if you were going to sit on the bike. I believe this was Yamaha's doing as I don't see how on Earth I could have bent the mount points on both sides in equal amounts/angles.

Anyway great pegs Radan! Pictures coming soon...

[Wy'east]

Here's the XTZ750 peg pics...








Pretty cool, no?

[bosley1980]

Order specifikation from US customer :
YAMAHA WR250R
Footpegs:
- wide
- 15-20mm lower
- backward as standart





here is result only video (imageshack = no more for free)
[youtube]ZeLGUwBr_Bg[/youtube]

Realization:

[bosley1980]

HERE IS PICTURES FROM CUSTOMER



customer wrote:
"I got the lowered pegs installed and out for a ride today. They are AWESOME! Thank you so much. I'm very happy."
"I got to do a linger ride this weekend and test things better. I'm MUCH more comfortable both seated and standing with these pegs. "

THANK YOU

[bosley1980]

NEXT PROJECT:
DRZ lower pegs -15mm

[youtube]bEaq_aWcqcQ[/youtube]

HERE IS IN REAL



I hope customer will be satisfacted...

[bosley1980]

ONE CUSTOMER FROM US

Write "I'm sure the second bar is not needed for structure but I prefer the look of it"

SURE NO PROBLEM

like this?


IN REAL...



IN REAL...from customer

[bosley1980]

Here is footpegs for XTZ 750 Super tenere
-50mm lower (coppare with standart original)



and some pictures from today "making of"



tomorrow surface finishing and shipping

it is MY 100 SET WHAT I PRODUCE and last of this version