Thought I was good to go......

Post Reply
Short-edd
No Gold Stars Yet
No Gold Stars Yet
Posts: 19
Joined: Thu May 23, 2013 9:36 pm
What Bike or Bikes Do You Own?: 1984 XT600 Tenere
Previously Owned Bikes: Pan, VFR, ZZR, 750gsx, fazer 600, BSA,
Location: Manchester, UK

Thought I was good to go......

Post by Short-edd »

So after sorting the starting problem here I am, Fuelled up, Tyres up, Climbed up, Spirits up and..............No lights!! power supply is there, connections are good, checked wiring for breaks, damage and wear, fitted new lamps today, front lamp now works (but not the side light) nothing on the rear light / brake light.
As electrics are a black art to me I don’t expect an easy resolve but any advise that point me in the right direction would be appreciated (bearing in mind you are replying to an electrically dyslectic idiot).
Edd.
User avatar
Mezo
Dashingly Handsome
Dashingly Handsome
Posts: 6108
Joined: Wed Mar 23, 2011 11:01 am
What Bike or Bikes Do You Own?: Kymco agility 125 ;-)
Previously Owned Bikes: Honda SS50, Suzuki TS50, Honda CB100, Honda CR125RZ, Yamaha YZ125, Kawasaki KX250, Suzuki TL1000S, Ducati 900SS, Ducati 900SL, a few Tenere`s.
Location: Queensland Australia
Contact:

Re: Thought I was good to go......

Post by Mezo »

So your brake light does not work? forget the other stuff for & min, when you pull either the front or rear brake nothing happens is that correct?

Mezo.
"A wise man makes his own decisions, an ignorant man follows public opinion"
Short-edd
No Gold Stars Yet
No Gold Stars Yet
Posts: 19
Joined: Thu May 23, 2013 9:36 pm
What Bike or Bikes Do You Own?: 1984 XT600 Tenere
Previously Owned Bikes: Pan, VFR, ZZR, 750gsx, fazer 600, BSA,
Location: Manchester, UK

Re: Thought I was good to go......

Post by Short-edd »

Yes, Nothing from the hand or foot levers, I know power is running to it, and I have replaced the rear lamp twice.
Edd.
55W1985
Almost there
Almost there
Posts: 781
Joined: Sun Apr 03, 2011 6:46 am
What Bike or Bikes Do You Own?: XR 650L 1994,XT 600Z 55W 1985
Previously Owned Bikes: CX 500 1981,R-80G/S PD 1987
Location: Buenos Aires,ARGENTINA
Contact:

Re: Thought I was good to go......

Post by 55W1985 »

Indicators are working?
Look there is a black double pin socket in the loom,if any of those two are doing a false contact then it will do that.
XR650L(1994) 55W (1985)
Short-edd
No Gold Stars Yet
No Gold Stars Yet
Posts: 19
Joined: Thu May 23, 2013 9:36 pm
What Bike or Bikes Do You Own?: 1984 XT600 Tenere
Previously Owned Bikes: Pan, VFR, ZZR, 750gsx, fazer 600, BSA,
Location: Manchester, UK

Re: Thought I was good to go......

Post by Short-edd »

Hi 55w, Indicators working well, I will have a look for this double pin to-night.
Cheers Edd.
Short-edd
No Gold Stars Yet
No Gold Stars Yet
Posts: 19
Joined: Thu May 23, 2013 9:36 pm
What Bike or Bikes Do You Own?: 1984 XT600 Tenere
Previously Owned Bikes: Pan, VFR, ZZR, 750gsx, fazer 600, BSA,
Location: Manchester, UK

Re: Thought I was good to go......

Post by Short-edd »

All that faffing about and it turned out to be the earth wire to the back light unit,
looked ok at first, then found the wire had parted from the holder but the outer sleeve was firmly fix.
Out come; don’t believe your eyes with electrical connections.
Thanks for the diagram Mezo.
Edd.
Post Reply