I tried for days - feeling my way. I can't remember exactly how I made it - but I remember it was almost impossible to do just by feeling with your fingers...

I think I removed the tank - and then it was very easy. But i'm not completely sure :dunno: - But if you're still having trouble I would try ...

Succes!!! I went through all the wires last night and finally found two errors. One of the bullet connectors was broken AND the socket for the bulb wasn't clean any more resulting in too low current to the bulb. The two things put together made the error. Fixing the bullet connector AND cleaning the ...

Could not help notice! But it might be worth your time to take a look at the fork seal on the right front fork. As is in the photograph above.

+ Any idea on the weight to that Arrow ?

Socks

Thanks for spotting the leaky fork - but it is actually a stain from last year. And you're quite right ...

Mezo wrote:Arrows are good (nice sound) welcome anyhow.

Mezo.

Thanks!


And now look at this

Hi !
Is the bulb itself okay ?
Bill

Yes, the bulb is fine. Tried to switch with the others, it works.


Are you getting 12volts to the left/front?
Could be a dirty handlebar switch.
Rick

I haven't checked actually. Just been focusing on the left/back one. Will check!


Take the lens cover off ...

My turn signal (left/back) is not working. All the front ones work and the right/back is also working.
When I start the signals on the right side, they blink fine.
But when I start signals on the left side the font one light up, and stays on. The back doesn't turn on. I guess the relay need a ...

I'm now waiting for the shipping of my new arrow silencer
The bike is just standing in the garage waiting for it...

Just found this -> http://www.horizonsunlimited.com/hubb/y ... tting-5790

Guess I shouldn't expect re-jetting, as also mentioned above

Question 1:

Is it ok to start my bike without the silencer? Just for a short while, or is it no go?
Yes it is OK. Just be careful of hot gas melting any nearby plastic parts. :fireball:


Question 2:

Will silencers for other XT 600 models fit my 3aj -
As far as I know, most silencer from 1984 ...

Hi all , this is my first post. I'm the owner of an old Tenere 3aj and I live in Denmark. I hope to have lots of good reads and advice in this forum in the future. Of course also share knowledge, but I must admit, that i'm not that skilled into the art of Tenere'ism yet :-)

I have a semi urgent ...