Good evening!

I want to get rid of that low front fender on my 2008 Z. Does a R-fender fit right on or do I have to look for some universal?

greetings
laidback

Check under the bottom yoke to see if it has the four holes to accept, if yes, just try one.

jibber wrote: Fri Aug 20, 2021 6:18 am Check under the bottom yoke to see if it has the four holes to accept, if yes, just try one.

Thanks for answer! Yes I´ve checked and it looks like an R fender would fit the holes - IF the rear part of the fender is short enough.
It´s such a short space between the yoke and the cooler on the Z and don´t know if it´s the same on the R? I thought if anyone had tried...

The reason to swap is of course it would look so much harder with a high fender!

I put a link up to a 'copy' of a defunct forum, have a look on their, someone must have done the conversion sometime

Actually, if you just Google 'xt660z front mudguard ' it brings up a load of helpful images.

jibber wrote: Fri Aug 20, 2021 4:28 pm Actually, if you just Google 'xt660z front mudguard ' it brings up a load of helpful images.

Thanks for the tip, i´ll do as you say!

jibber wrote: Fri Aug 20, 2021 4:28 pm Actually, if you just Google 'xt660z front mudguard ' it brings up a load of helpful images.

Found it, OTR got one!

https://www.off-the-road.de/en/XT-660Z- ... enere.html
Thanks again!