Page 1 of 2

Gearbox bearings

Posted: Mon Sep 30, 2019 3:27 am
by Primax
Got a heap more power with the carb retrofit and a heap more growling from the gearbox bearings.
Anyone guide me on necessary parts for an overhaul.

Re: Gearbox bearings

Posted: Mon Sep 30, 2019 6:00 am
by motorang
Open the block and you shall know.
Maybe its not the bearings but the gears.

Image

Andy

Re: Gearbox bearings

Posted: Tue Oct 01, 2019 3:27 am
by Primax
Is the image from your bike?

Re: Gearbox bearings

Posted: Tue Oct 01, 2019 5:40 am
by motorang
Yes, a 1987 Tenere.
About 74.000 km on the gearbox. I did notice the different sound when riding dunes.
Fifth gear.

Andy

Re: Gearbox bearings

Posted: Tue Oct 01, 2019 9:50 am
by Patrick
Is that your fith gear?
I had to replace the fith gear on my 3AJ with 98000 kilometres that looked very much the same. From all the similar issues ive seen, it seems to be a common issue with the Tenere. All my other internals were pristine.

Re: Gearbox bearings

Posted: Wed Oct 02, 2019 11:03 pm
by cadno
I've just striped a seized 1VJ motor where the area underneath the engine number was raised and had cracked the casing. When I split the cases the fifth gear was in six equal sized pieces and had totally destroyed the inside of the gearbox and right hand case.

Re: Gearbox bearings

Posted: Thu Oct 03, 2019 3:48 am
by Primax
Cadno, is you bike an 80's model as well?

Re: Gearbox bearings

Posted: Thu Oct 03, 2019 12:54 pm
by cadno
Yes it's a second generation Tenere. Kick start and electric, they came out in 1985. I wouldn't know the mileage as it came without clocks.
But I've never seen a gearbox and case quite so well destroyed :bigeek: I hope it happened at low speed, but more than likely in 5th :omg:

Re: Gearbox bearings

Posted: Fri Oct 04, 2019 4:55 am
by Primax
Mine is a 96, maybe then over the fifth trouble.

Re: Gearbox bearings

Posted: Sat Oct 05, 2019 12:10 am
by jibber
Think again