Page 1 of 3
XTZ660 parts fit XT600e?
Posted: Thu Jan 31, 2013 6:19 pm
by Scutty
Hi
New guy here - I have just bought a 1992 XT600E and then got my hands on a load of 1997 XTZ660 parts inc front forks, rear shock, brake calipers, fuel tank, seat etc
Any idea what would fit on simply (if anything) ?
Re: XTZ660 parts fit XT600e?
Posted: Fri Feb 01, 2013 12:46 am
by xtzrick
Hi Scutty &
The calipers might fit, the 660 forks are 43mm the 600 are 41mm so you'd need 660 yokes to fit them & the rear spring is alot stronger/stiffer on the 660 so unless you do a lot of this

you would want to change the 660s shock spring rate.
No idea about the seat or tank
Rick
Re: XTZ660 parts fit XT600e?
Posted: Fri Feb 01, 2013 12:51 am
by Scutty
Rick
Thanks for the response. I have yokes for the forks so the might be a go. Also, I'm 6'3" and 19st so maybe the rear shock would be ideal!
God knows what else is in the box of stuff, its quite a pile of parts.
Re: XTZ660 parts fit XT600e?
Posted: Fri Feb 01, 2013 1:14 am
by xtzrick
Scutty wrote: I'm 6'3" and 19st so maybe the rear shock would be ideal!
Just looked at the spring rate chart & yep, you're right
Rick
Re: XTZ660 parts fit XT600e?
Posted: Fri Feb 01, 2013 9:19 am
by Scutty
Rick - do you think just the spring or the whole shock unit? The shock, I believe is fully adjustable vs the XT's preload only from what I understand?
I might have to wait until I get the XT into the garage and stripped out the rear shock before I can tell - I have googled a lot but not much regarding this swap-over.
The other thing is I might have an 18" rear wheel coming and wanted to know if it can replace the 17" currently on the XT?
XTZ660 parts fit XT600e?
Posted: Fri Feb 01, 2013 9:25 am
by Teneroma
Not sure if you would call the XTZ shock fully adjustable. It has preload and rebound control, is there much else to more modern shocks
Re: XTZ660 parts fit XT600e?
Posted: Fri Feb 01, 2013 11:45 am
by xtzrick
Fully adjustable shocks have preload, rebound & COMPRESSION adjustment. The XTZ shock only has preload & rebound as Teneroma says.
Unfortunately fitting a stronger spring can mean you want less compression damping, I'd use the XTZ shock if you can, probably better set up for the spring rate.
Rick
Re: XTZ660 parts fit XT600e?
Posted: Fri Feb 01, 2013 12:06 pm
by Scutty
Great, thanks for the info. I will have to document my work once I get started. It'll be interesting to see if I can get the tank and brakes to fit.
Re: XTZ660 parts fit XT600e?
Posted: Sat Feb 02, 2013 12:52 am
by xtzrick
The Tenere tank is a few inches longer so you'll be sat back further in a less aggresive riding position, be nice if you could swap between the 2
We love pics
Rick
Re: XTZ660 parts fit XT600e?
Posted: Sat Feb 02, 2013 1:38 am
by Mezo
xtzrick wrote:We love pics
+ 1
And the old rule on any forum,,,if there`s no pics it never happened.
Not sure about the 18" rear wheel? you may find your limited on tire choice (especially knobbies).
Mezo.