Re: VanAndys 34L slug build
Posted: Mon Jul 29, 2013 1:32 pm
They don´t sell this as a kit for the 34L.I did the same got one set with all parts(rubber and carton) replaced them but kept the original needle.Or you just buy all parts OEM.
https://www.tenere.co.uk/forum/
VanAndys 34L slug build
Page 8 of 13
Re: VanAndys 34L slug build
Posted: Mon Jul 29, 2013 3:15 pm
When I went through mine I got most of the parts through an oem online store. Mine had the same needle as yours, but it was the bowl drain screw that kept leaking on mine.
Re: VanAndys 34L slug build
Posted: Mon Jul 29, 2013 5:52 pm
Yeap, I think your right karl. I have found this for 83 - 87 XT, not a full kit, I think I'm chasing my tail a bit, I'll check OEM before I buy.55W1985 wrote:They don´t sell this as a kit for the 34L.I did the same got one set with all parts(rubber and carton) replaced them but kept the original needle.Or you just buy all parts OEM.
Re: VanAndys 34L slug build
Posted: Tue Jul 30, 2013 2:10 am
That one looks nice! Check the flaoter level.My needle is still doing it!
Re: VanAndys 34L slug build
Posted: Sun Sep 29, 2013 9:55 pm
Well the slugs finally getting some attention, had lots on, me van needed bumpers, a house needed painting, the misses wanted beer...
Anyway some pic's. second one shows an earlier light frame, not now on bike.
I've got a problem....
My headlight cowl 17F 28351 00 36 and my light frame 2JX 23174 00 (not photo 2) don't seam to want to marry up with my bike. the superseded frame has a jutting out piece that clashes with me forks (held by hand in roughly correct position), it looks like a bracket for indicator relay, easily bent or cut off, but before I do and make it un-returnable, has anyone got some pic's or microfiche of the breakdown of bracket for this location? I have a steering parts picture but it don't show all parts, cowl, frame, etc.
Anyway some pic's. second one shows an earlier light frame, not now on bike.
I've got a problem....
My headlight cowl 17F 28351 00 36 and my light frame 2JX 23174 00 (not photo 2) don't seam to want to marry up with my bike. the superseded frame has a jutting out piece that clashes with me forks (held by hand in roughly correct position), it looks like a bracket for indicator relay, easily bent or cut off, but before I do and make it un-returnable, has anyone got some pic's or microfiche of the breakdown of bracket for this location? I have a steering parts picture but it don't show all parts, cowl, frame, etc.
Re: VanAndys 34L slug build
Posted: Sun Sep 29, 2013 10:19 pm
That's the wrong bracket for a 34L Andy...
Re: VanAndys 34L slug build
Posted: Sun Sep 29, 2013 10:23 pm
Thanks Geoff, thought so, you'd thought a superseded part would fit.GeoffD wrote:That's the wrong bracket for a 34L Andy...
I think I'll check ebay for the 34L part.
Re: VanAndys 34L slug build
Posted: Mon Sep 30, 2013 5:00 pm
Hi
Guess the part time.....
I have found this on ebay but the seller can't do better than XT600, anyone recognise it? is it 34L?
Guess the part time.....
I have found this on ebay but the seller can't do better than XT600, anyone recognise it? is it 34L?
Re: VanAndys 34L slug build
Posted: Mon Sep 30, 2013 6:13 pm
Just looked at my XT and it is identical to yours. Given the rest of the bike seems to be 34L I'd say that's what it is.
The tap sticking up from the bottom is the light adjustment.
The tap sticking up from the bottom is the light adjustment.
VanAndys 34L slug build
Posted: Mon Sep 30, 2013 6:42 pm
That's not a 34L one either, looks like a XT600E (3TB) one....I'll take a photo of the correct one for you tommorrow