AT LAST
Photos from Customer - He is very satisfied !!!




(Thank to Mr. Oliver for excellent photos)

You need to make him a "big foot" for his side stand.

As I now have the new age Tenere 660 Z, would you know if these pegs fit them also ???

phil w wrote:As I now have the new age Tenere 660 Z, would you know if these pegs fit them also ???

I don't know - I never see this bike. But you can measure and compare with the drawing.
Right?
If you send me via PM your email adress I send you my DRAWING.

One customer from US have requirement to extreme shift backwards -25mm from axis AND -10mm lower too.
Extremely hard requirements (difficult task)... But I TRY - Now I wait for feedback from the customer.

Model from customer:



MODEL:



DRAWING:


and implementation:




I told him advance that it may not work properly, because the footpegs shall folded down (during the fall).
We will see...

And here photos from Customer:

Wide stainless steel foot pegs HONDA XR650L HONDA XR650L PEGZ (so if the administrator allows)

Here my design (now I wait for dimension and after do so changes of attachment)

Morning..need some pegs for my yz 465 to finaly finish it,I have a feeling the early xt ones fit,I will check the sizes and report back..
Thanks marc.

marcm wrote:Morning..need some pegs for my yz 465 to finaly finish it,I have a feeling the early xt ones fit,I will check the sizes and report back..
Thanks marc.

Hello MARc,
Yes, I wait.
If they not fit I produce new type for you

Hi Bosley
Just got my tenere in the same place as the yz and have swapped a peg from xt to yz,fitment is the same.
Let me know how many penny's you want for a set,if I was richer at the moment I would take 2 sets but I need to save some cash for next jolly I go one.
It may be worth you letting some of the twinshock motocross boys know about your pegs as quite a few yams out there racing.
There are some modern stainless pegs which can be adapted but it involves drilling original mounting holes out to 10mm plus a bit of grinding and pissing about,but they look shit compared to your pegs..your pegs look much better and would be a bolt straight on..