WIDE STAINLESS STEEL FOOTPEGS YAMAHA, HONDA, KTM, HUSQVARNA

Post Reply
User avatar
bosley1980
Trusted
Trusted
Posts: 275
Joined: Fri Mar 02, 2012 8:13 pm
What Bike or Bikes Do You Own?: YAMAHA XT600E (1998)
YAMAHA TENERE 700 (2019)
HONDA CB1100RS (2020)
Previously Owned Bikes: BMW R1200GS (2006)
HONDA CRF250RALLY (2017)
YAMAHA XT660Z Tenere (2013)
HONDA CRF250L (2015)
MZ150ETZ (1988)
Location: Central Europe
Contact:
Contact bosley1980

Re: FOOTPEGS for ENDURO

Post by bosley1980 »

NordieBoy wrote:
Fred333 wrote:Isn´t there suposed to be a spring on the footpegbolt?
In order to hold the peg down?
Olli
The spring from your old peg?
YES Fred333, use the old spring - it's so designed. I use it so and work great.
by the way, if you do not have the correct position (horizontal) adjusted according to the sketch.
Image

Foot hold very fixed and not slide it, right :wink2: ? Stainless steel is very sharp (edge)
Powder coating edges slightly arches...
Last edited by bosley1980 on Thu Jul 14, 2016 7:05 pm, edited 1 time in total.
Top
Fred333
Financial
Financial
Posts: 751
Joined: Sun Mar 27, 2011 6:42 pm
What Bike or Bikes Do You Own?: Yamaha TT 600 1984
Previously Owned Bikes: Vespa Rally 200, Vespa SS 50 and alot more old (real) Vespas!!!
Yamaha RD 250, Suzuki GT 380 , Suzuki GSX 1200, CBR 600, DT 175, DT 250, DT 400, Kawasaki Z 200, Honda Varadero 1000, VFR 800, Honda ANF 125 Innova,
XR 600, BMW XChallenge 650, Dr Big, Suzuki GS 500 (four cylinder)
and.....?
Location: Hamburg , Germany

Re: FOOTPEGS for ENDURO

Post by Fred333 »

Yes, they are sharp. I will go on the hunt for springs...
:-)
Olli
Yamaha TT 600 36A59X3SW - Mix
Restauration have a click here: http://www.tenere.co.uk/forum/viewtopic.php?f=4&t=82
Top
User avatar
viper1
Financial
Financial
Posts: 25
Joined: Wed Jan 04, 2012 6:41 pm
What Bike or Bikes Do You Own?: XT600Z / 3AJ / 1989
Location: Danmark

Re: FOOTPEGS for ENDURO

Post by viper1 »

How and where can i buy these footpegs in stainless ?
It´s never too late to have a nice childhood....
Top
Fred333
Financial
Financial
Posts: 751
Joined: Sun Mar 27, 2011 6:42 pm
What Bike or Bikes Do You Own?: Yamaha TT 600 1984
Previously Owned Bikes: Vespa Rally 200, Vespa SS 50 and alot more old (real) Vespas!!!
Yamaha RD 250, Suzuki GT 380 , Suzuki GSX 1200, CBR 600, DT 175, DT 250, DT 400, Kawasaki Z 200, Honda Varadero 1000, VFR 800, Honda ANF 125 Innova,
XR 600, BMW XChallenge 650, Dr Big, Suzuki GS 500 (four cylinder)
and.....?
Location: Hamburg , Germany

Re: FOOTPEGS for ENDURO

Post by Fred333 »

Send "bosley1980" a message
O.
Yamaha TT 600 36A59X3SW - Mix
Restauration have a click here: http://www.tenere.co.uk/forum/viewtopic.php?f=4&t=82
Top
patrick2wd
Three to collect
Three to collect
Posts: 283
Joined: Tue Mar 29, 2011 6:05 pm
What Bike or Bikes Do You Own?: 3AJ!!!

a bycicle..

and a volvo 142
Previously Owned Bikes: now owning my 3th 3AJ, but also had:

CBX550F2
XL600R
VF750S (2X)
GSX750F
R75-5
R65
3AJ (now 3th)
Location: In Amsterdam Holland.. yes a Dutchie.. (still a non smoker)
Contact:
Contact patrick2wd

Re: FOOTPEGS for ENDURO

Post by patrick2wd »

looks interesting, might need a set for my bike.. (3AJ)

and for my "other" bike pretty soon..

let me know about cost please, do these fit on a 3LD/ S10 too?
:thanks:
..pain is the feeling of fear leaving your body..
Top
xpag6259
Financial
Financial
Posts: 85
Joined: Sun Jul 10, 2011 6:19 am
What Bike or Bikes Do You Own?: Triumph Speed Triple 1995
Yamaha SR500 1978
Yamaha RT3 1973
Yamaha RT3 1973
Yamaha XT600 Tenere 1983
Yamaha TT600 1984
Previously Owned Bikes: Ducati 860GT
Suzuki GSX 250
Yamaha XJ900
Kawasaki GPZ
Yamaha CT3
Location: Melbourne, Australia

Re: FOOTPEGS for ENDURO

Post by xpag6259 »

Mine arrived in record time to Australia. Haven't fitted them yet, but they look fantastic, great quality. Pics to follow.

thanks bosley1980.

paul
so many projects, so little time
Top
Eric66
Financial
Financial
Posts: 922
Joined: Tue Aug 23, 2011 7:20 am
What Bike or Bikes Do You Own?: XT600Z 83 Tenere
Previously Owned Bikes: XT 250,XL 500,KLR600,XT600Z Tenere 83,Ducati 900SS 81
Location: QLD, Australia

Re: FOOTPEGS for ENDURO

Post by Eric66 »

Hello Paul, pictures of the whole bike please, not just the foot pegs :popcorn:
Regards Eric
Top
User avatar
bosley1980
Trusted
Trusted
Posts: 275
Joined: Fri Mar 02, 2012 8:13 pm
What Bike or Bikes Do You Own?: YAMAHA XT600E (1998)
YAMAHA TENERE 700 (2019)
HONDA CB1100RS (2020)
Previously Owned Bikes: BMW R1200GS (2006)
HONDA CRF250RALLY (2017)
YAMAHA XT660Z Tenere (2013)
HONDA CRF250L (2015)
MZ150ETZ (1988)
Location: Central Europe
Contact:
Contact bosley1980

Re: FOOTPEGS for ENDURO

Post by bosley1980 »

xpag6259 wrote:Mine arrived in record time to Australia. Haven't fitted them yet, but they look fantastic, great quality. Pics to follow.

thanks bosley1980.

paul
WOW just 5 bussinesdays - REALY RECORD!!!
I'm glad you're satisfied with quality footpegs and I can not wait for photos now :star:

In HQ send me to my mail please.
Top
User avatar
bosley1980
Trusted
Trusted
Posts: 275
Joined: Fri Mar 02, 2012 8:13 pm
What Bike or Bikes Do You Own?: YAMAHA XT600E (1998)
YAMAHA TENERE 700 (2019)
HONDA CB1100RS (2020)
Previously Owned Bikes: BMW R1200GS (2006)
HONDA CRF250RALLY (2017)
YAMAHA XT660Z Tenere (2013)
HONDA CRF250L (2015)
MZ150ETZ (1988)
Location: Central Europe
Contact:
Contact bosley1980

Re: FOOTPEGS for ENDURO

Post by bosley1980 »

new model - MARK VI
Image
What do you think?
Last edited by bosley1980 on Sat Sep 15, 2012 3:19 pm, edited 1 time in total.
Top
User avatar
Mezo
Dashingly Handsome
Dashingly Handsome
Posts: 6108
Joined: Wed Mar 23, 2011 11:01 am
What Bike or Bikes Do You Own?: Kymco agility 125 ;-)
Previously Owned Bikes: Honda SS50, Suzuki TS50, Honda CB100, Honda CR125RZ, Yamaha YZ125, Kawasaki KX250, Suzuki TL1000S, Ducati 900SS, Ducati 900SL, a few Tenere`s.
Location: Queensland Australia
Contact:
Contact Mezo

Re: FOOTPEGS for ENDURO

Post by Mezo »

Very nice, have you thought about making pivot pegs?

Mezo.
"A wise man makes his own decisions, an ignorant man follows public opinion"
Top
Post Reply

Return to “Vendors Section”