Carb inlet manifolds.

Airbox, Fuelpump, Carburettor
Post Reply
User avatar
Mezo
Dashingly Handsome
Dashingly Handsome
Posts: 6108
Joined: Wed Mar 23, 2011 11:01 am
What Bike or Bikes Do You Own?: Kymco agility 125 ;-)
Previously Owned Bikes: Honda SS50, Suzuki TS50, Honda CB100, Honda CR125RZ, Yamaha YZ125, Kawasaki KX250, Suzuki TL1000S, Ducati 900SS, Ducati 900SL, a few Tenere`s.
Location: Queensland Australia
Contact:
Contact Mezo

Re: Carb inlet manifolds.

Post by Mezo »

One looks longer than the other, have you measured the length?

Mezo.
"A wise man makes his own decisions, an ignorant man follows public opinion"
Top
Fred333
Financial
Financial
Posts: 751
Joined: Sun Mar 27, 2011 6:42 pm
What Bike or Bikes Do You Own?: Yamaha TT 600 1984
Previously Owned Bikes: Vespa Rally 200, Vespa SS 50 and alot more old (real) Vespas!!!
Yamaha RD 250, Suzuki GT 380 , Suzuki GSX 1200, CBR 600, DT 175, DT 250, DT 400, Kawasaki Z 200, Honda Varadero 1000, VFR 800, Honda ANF 125 Innova,
XR 600, BMW XChallenge 650, Dr Big, Suzuki GS 500 (four cylinder)
and.....?
Location: Hamburg , Germany

Re: Carb inlet manifolds.

Post by Fred333 »

Try this guy in Germany:
Moritz Kullmann
mail@motoritz.de
English is no problem to him.
He has everything you need. He slauthers XT´s for a living. Buhuhu...
Olli
Yamaha TT 600 36A59X3SW - Mix
Restauration have a click here: http://www.tenere.co.uk/forum/viewtopic.php?f=4&t=82
Top
Fred333
Financial
Financial
Posts: 751
Joined: Sun Mar 27, 2011 6:42 pm
What Bike or Bikes Do You Own?: Yamaha TT 600 1984
Previously Owned Bikes: Vespa Rally 200, Vespa SS 50 and alot more old (real) Vespas!!!
Yamaha RD 250, Suzuki GT 380 , Suzuki GSX 1200, CBR 600, DT 175, DT 250, DT 400, Kawasaki Z 200, Honda Varadero 1000, VFR 800, Honda ANF 125 Innova,
XR 600, BMW XChallenge 650, Dr Big, Suzuki GS 500 (four cylinder)
and.....?
Location: Hamburg , Germany

Re: Carb inlet manifolds.

Post by Fred333 »

Oh, just saw.... it´s the "other" Wales.
But maybe if you want some more parts it makes sense...
:beer:
Yamaha TT 600 36A59X3SW - Mix
Restauration have a click here: http://www.tenere.co.uk/forum/viewtopic.php?f=4&t=82
Top
Fred333
Financial
Financial
Posts: 751
Joined: Sun Mar 27, 2011 6:42 pm
What Bike or Bikes Do You Own?: Yamaha TT 600 1984
Previously Owned Bikes: Vespa Rally 200, Vespa SS 50 and alot more old (real) Vespas!!!
Yamaha RD 250, Suzuki GT 380 , Suzuki GSX 1200, CBR 600, DT 175, DT 250, DT 400, Kawasaki Z 200, Honda Varadero 1000, VFR 800, Honda ANF 125 Innova,
XR 600, BMW XChallenge 650, Dr Big, Suzuki GS 500 (four cylinder)
and.....?
Location: Hamburg , Germany

Re: Carb inlet manifolds.

Post by Fred333 »

http://www.motorradonline.de/motorraede ... 56522.html
Yamaha TT 600 36A59X3SW - Mix
Restauration have a click here: http://www.tenere.co.uk/forum/viewtopic.php?f=4&t=82
Top
Hodgo1981
On the ladder
On the ladder
Posts: 86
Joined: Wed Aug 31, 2016 1:03 am
What Bike or Bikes Do You Own?: Yamaha WR250F 2006
in the future:
xt600 or xt600z
Previously Owned Bikes: 1989 XT600
Location: New South Wales

Re: Carb inlet manifolds.

Post by Hodgo1981 »

Mezo wrote:One looks longer than the other, have you measured the length?

Mezo.
Looks like same length, how ever its the bends in the alternate planes I am concerned about.
I grabbed the 2 airbox pipes off my spare parts bike, and tried to make them fit on the wrong side.... but that just isn't going to happen.

So I guess that my "2nd project bike" is now just a "spare parts" bike... and I will be stealing lots more off it.
Top
Hodgo1981
On the ladder
On the ladder
Posts: 86
Joined: Wed Aug 31, 2016 1:03 am
What Bike or Bikes Do You Own?: Yamaha WR250F 2006
in the future:
xt600 or xt600z
Previously Owned Bikes: 1989 XT600
Location: New South Wales

Re: Carb inlet manifolds.

Post by Hodgo1981 »

Fred333 wrote:Try this guy in Germany:
Moritz Kullmann
mail@motoritz.de
English is no problem to him.
He has everything you need. He slaughters XT´s for a living. Buhuhu...
Olli
Thanks Olli,

I think I will now be slaughtering my own 2nd bike... I did have hopes of restoring it too.

Now I have the tough choice of what colour to put it together as Black and red or white and red.
Top
User avatar
xtrider
Financial
Financial
Posts: 550
Joined: Mon Jun 17, 2013 11:21 pm
What Bike or Bikes Do You Own?: 88 XT600 Yamaha , , 525XC KTM, '96 Kawasaki KLX650 , '05 Suzuki DRZ400, Suzuki LTR450
Previously Owned Bikes: 91 DR 650 Suzuki, 81 DS250 Suzuki, 73 ?250 Yamaha ,05 KLR650 , '02 DR650 Suzuki, Honda XL600R
Location: Wisconsin, USA

Re: Carb inlet manifolds.

Post by xtrider »

I'd have a spare set of those intake tubes , used of course but still good unless your after strictly new .

Any other parts you looking for ?





.
'08 Husqvarna TE510 .. //..'05 Suzuki DRZ470 stroker bbore..//..'95 & '96 Kawasaki KLX650 ..//..'88 XT600 ..//.. '86XT600(body)3TB hi comp motor ..//.. '06 Suzuki LTR450 ..//
'09 525XC KTM .. //.. '85 XT600/660 (660 Raptor bottom)
Top
Hodgo1981
On the ladder
On the ladder
Posts: 86
Joined: Wed Aug 31, 2016 1:03 am
What Bike or Bikes Do You Own?: Yamaha WR250F 2006
in the future:
xt600 or xt600z
Previously Owned Bikes: 1989 XT600
Location: New South Wales

Re: Carb inlet manifolds.

Post by Hodgo1981 »

xtrider wrote:I'd have a spare set of those intake tubes , used of course but still good unless your after strictly new .

Any other parts you looking for ?

.
Hey XT rider,
For now I will just take the ones off my second bike. If/When I get around to fixing that bike up I'll see if you still have some... as well as many other parts I'm sure!

I think for now the parts I need to get my running bike roadworthy will all need to be new, but I'm still checking over it all and preparing a list.
Top
Post Reply

Return to “Intake Section”