Photos from Customer - He is very satisfied !!!
(Thank to Mr. Oliver for excellent photos)
WIDE STAINLESS STEEL FOOTPEGS YAMAHA, HONDA, KTM, HUSQVARNA
-
bosley1980
- Trusted
- Posts: 275
- Joined: Fri Mar 02, 2012 8:13 pm
- What Bike or Bikes Do You Own?: YAMAHA XT600E (1998)
YAMAHA TENERE 700 (2019)
HONDA CB1100RS (2020) - Previously Owned Bikes: BMW R1200GS (2006)
HONDA CRF250RALLY (2017)
YAMAHA XT660Z Tenere (2013)
HONDA CRF250L (2015)
MZ150ETZ (1988) - Location: Central Europe
- Contact:
Re: FOOTPEGS for ENDURO
AT LAST
Photos from Customer - He is very satisfied !!!
(Thank to Mr. Oliver for excellent photos)
Photos from Customer - He is very satisfied !!!
(Thank to Mr. Oliver for excellent photos)
Last edited by bosley1980 on Wed Nov 06, 2013 6:13 pm, edited 1 time in total.
-
itchywheels
- Financial
- Posts: 125
- Joined: Fri Nov 04, 2011 12:05 pm
- What Bike or Bikes Do You Own?: !989 XT600Z TENERE. Honda ZOOMER 110. Triumph Tiger 800.
- Previously Owned Bikes: Loads
- Location: Nottingham, UK
Re: FOOTPEGS for ENDURO
You need to make him a "big foot" for his side stand.
-
phil w
- Financial
- Posts: 168
- Joined: Sat Jul 07, 2012 9:32 am
- What Bike or Bikes Do You Own?: yamaha xtz660
- Previously Owned Bikes: transalp
- Location: Cardif, UK
Re: FOOTPEGS for ENDURO
As I now have the new age Tenere 660 Z, would you know if these pegs fit them also ???
-
bosley1980
- Trusted
- Posts: 275
- Joined: Fri Mar 02, 2012 8:13 pm
- What Bike or Bikes Do You Own?: YAMAHA XT600E (1998)
YAMAHA TENERE 700 (2019)
HONDA CB1100RS (2020) - Previously Owned Bikes: BMW R1200GS (2006)
HONDA CRF250RALLY (2017)
YAMAHA XT660Z Tenere (2013)
HONDA CRF250L (2015)
MZ150ETZ (1988) - Location: Central Europe
- Contact:
Re: FOOTPEGS for ENDURO
I don't know - I never see this bike. But you can measure and compare with the drawing.phil w wrote:As I now have the new age Tenere 660 Z, would you know if these pegs fit them also ???
Right?
If you send me via PM your email adress I send you my DRAWING.
-
bosley1980
- Trusted
- Posts: 275
- Joined: Fri Mar 02, 2012 8:13 pm
- What Bike or Bikes Do You Own?: YAMAHA XT600E (1998)
YAMAHA TENERE 700 (2019)
HONDA CB1100RS (2020) - Previously Owned Bikes: BMW R1200GS (2006)
HONDA CRF250RALLY (2017)
YAMAHA XT660Z Tenere (2013)
HONDA CRF250L (2015)
MZ150ETZ (1988) - Location: Central Europe
- Contact:
WR250R Atypycal
One customer from US have requirement to extreme shift backwards -25mm from axis AND -10mm lower too.
Extremely hard requirements (difficult task)... But I TRY - Now I wait for feedback from the customer.
Model from customer:
MODEL:
DRAWING:
and implementation:
I told him advance that it may not work properly, because the footpegs shall folded down (during the fall).
We will see...
Extremely hard requirements (difficult task)... But I TRY - Now I wait for feedback from the customer.
Model from customer:
MODEL:
DRAWING:
and implementation:
I told him advance that it may not work properly, because the footpegs shall folded down (during the fall).
We will see...
Last edited by bosley1980 on Wed Nov 06, 2013 6:16 pm, edited 1 time in total.
-
bosley1980
- Trusted
- Posts: 275
- Joined: Fri Mar 02, 2012 8:13 pm
- What Bike or Bikes Do You Own?: YAMAHA XT600E (1998)
YAMAHA TENERE 700 (2019)
HONDA CB1100RS (2020) - Previously Owned Bikes: BMW R1200GS (2006)
HONDA CRF250RALLY (2017)
YAMAHA XT660Z Tenere (2013)
HONDA CRF250L (2015)
MZ150ETZ (1988) - Location: Central Europe
- Contact:
-
bosley1980
- Trusted
- Posts: 275
- Joined: Fri Mar 02, 2012 8:13 pm
- What Bike or Bikes Do You Own?: YAMAHA XT600E (1998)
YAMAHA TENERE 700 (2019)
HONDA CB1100RS (2020) - Previously Owned Bikes: BMW R1200GS (2006)
HONDA CRF250RALLY (2017)
YAMAHA XT660Z Tenere (2013)
HONDA CRF250L (2015)
MZ150ETZ (1988) - Location: Central Europe
- Contact:
Wide stainless steel foot pegs HONDA XR650L
Wide stainless steel foot pegs HONDA XR650L HONDA XR650L PEGZ (so if the administrator allows)
Here my design (now I wait for dimension and after do so changes of attachment)
Here my design (now I wait for dimension and after do so changes of attachment)
-
marcm
- Halfway there
- Posts: 438
- Joined: Sun Sep 18, 2011 10:46 pm
- What Bike or Bikes Do You Own?: 34l tenere,it 175,rd 350lc,yz 465,250lc,yz 125 g 2 off,
- Previously Owned Bikes: a few...
- Location: UK
Re: FOOTPEGS for ENDURO
Morning..need some pegs for my yz 465 to finaly finish it,I have a feeling the early xt ones fit,I will check the sizes and report back..
Thanks marc.
Thanks marc.
-
bosley1980
- Trusted
- Posts: 275
- Joined: Fri Mar 02, 2012 8:13 pm
- What Bike or Bikes Do You Own?: YAMAHA XT600E (1998)
YAMAHA TENERE 700 (2019)
HONDA CB1100RS (2020) - Previously Owned Bikes: BMW R1200GS (2006)
HONDA CRF250RALLY (2017)
YAMAHA XT660Z Tenere (2013)
HONDA CRF250L (2015)
MZ150ETZ (1988) - Location: Central Europe
- Contact:
Re: FOOTPEGS for ENDURO
Hello MARc,marcm wrote:Morning..need some pegs for my yz 465 to finaly finish it,I have a feeling the early xt ones fit,I will check the sizes and report back..
Thanks marc.
Yes, I wait.
If they not fit I produce new type for you
-
marcm
- Halfway there
- Posts: 438
- Joined: Sun Sep 18, 2011 10:46 pm
- What Bike or Bikes Do You Own?: 34l tenere,it 175,rd 350lc,yz 465,250lc,yz 125 g 2 off,
- Previously Owned Bikes: a few...
- Location: UK
Wide stainless steel foot pegs YAMAHA YZ465
Hi Bosley
Just got my tenere in the same place as the yz and have swapped a peg from xt to yz,fitment is the same.
Let me know how many penny's you want for a set,if I was richer at the moment I would take 2 sets but I need to save some cash for next jolly I go one.
It may be worth you letting some of the twinshock motocross boys know about your pegs as quite a few yams out there racing.
There are some modern stainless pegs which can be adapted but it involves drilling original mounting holes out to 10mm plus a bit of grinding and pissing about,but they look shit compared to your pegs..your pegs look much better and would be a bolt straight on..
Just got my tenere in the same place as the yz and have swapped a peg from xt to yz,fitment is the same.
Let me know how many penny's you want for a set,if I was richer at the moment I would take 2 sets but I need to save some cash for next jolly I go one.
It may be worth you letting some of the twinshock motocross boys know about your pegs as quite a few yams out there racing.
There are some modern stainless pegs which can be adapted but it involves drilling original mounting holes out to 10mm plus a bit of grinding and pissing about,but they look shit compared to your pegs..your pegs look much better and would be a bolt straight on..