Search found 596 matches

by donnybach
Sat Sep 12, 2026 9:44 am
Forum: The Tenere Forum Flea Market
Topic: Stunning 1VJ Excel wheels for sale
Replies: 4
Views: 3627

Re: Stunning 1VJ Excel wheels for sale

Cadno , if you don't sell them, you can pass them down here if you need the space. 😉
by donnybach
Sat Aug 22, 2026 9:01 am
Forum: The XT600 Forum
Topic: XTDM600E
Replies: 8
Views: 11038

Re: XTDM600E

Thought you were uploading a finished picture of you in a far off land on it. 😂
( I had my daily driver land rover in boxes for two years so can't talk).
Do you have donor stuff left over to start a project of tdm850 engine in an XT frame?🤔
by donnybach
Sat Aug 22, 2026 8:54 am
Forum: The XT600 Forum
Topic: XT 600 1980's Factory New Build/Service Manuals £49.00
Replies: 1
Views: 1491

Re: XT 600 Factory Build/Service Manuals

Can't believe nobody has chipped in. Not my model but would jump on them if I did have one.
by donnybach
Sat Aug 22, 2026 8:52 am
Forum: The XT600Z 1VJ Ténéré Forum
Topic: Workshop manual
Replies: 0
Views: 2825

Workshop manual

https://ebay.io/m/e1OJsB

Noticed the reprinted workshop manual is back on eBay. It's from NZ. About £60 delivered.
Bought one years ago. Includes xt550 through to 1VJ.
Extremely handy.
by donnybach
Sun Aug 02, 2026 8:06 pm
Forum: The XT600Z 1VJ Ténéré Forum
Topic: Choke/starting issues... Advice appreciated :)
Replies: 2
Views: 1176

Re: Choke/starting issues... Advice appreciated :)

Check the choke easily enough. Can see down the top of the carb with the tank and air
Box off. Take the top off and you can see the hole for the air. Also take the rubber off the choke and see if you can measure the distance to plunger, then disconnect it, push it all the way in and see if there's a ...
by donnybach
Tue Jul 07, 2026 6:47 pm
Forum: The XT600Z 1VJ Ténéré Forum
Topic: 1VJ RUNNING PROBLEMS
Replies: 4
Views: 2727

Re: 1VJ RUNNING PROBLEMS

All electrical stuff available from electrex, and some new items have started appearing on eBay recently. Any carb stuff still from Yamaha genuine.
by donnybach
Wed Jul 01, 2026 11:51 pm
Forum: The XT600Z 1VJ Ténéré Forum
Topic: High torque on crucial engine nuts.
Replies: 1
Views: 1485

Re: High torque on crucial engine nuts.

Can't remember all the order of reassembly, but to stop gears turning when tightening, I use a copper coin between the teeth of meshing gears. Soft metal, won't damage gears , but will lock it solid.
by donnybach
Fri Jun 19, 2026 7:56 am
Forum: The XT600Z 1VJ Ténéré Forum
Topic: Frankenstein 1VJ running but not correctly
Replies: 1
Views: 2497

Re: Frankenstein 1VJ running but not correctly

Carb set to standard as per manual, and checked for clear passages and jets? And sticky float valve, especially if it's been left a while.
And check all the pick up and stator windings while you're there.
by donnybach
Fri Jun 19, 2026 7:52 am
Forum: The XT600Z 1VJ Ténéré Forum
Topic: 1VJ RUNNING PROBLEMS
Replies: 4
Views: 2727

Re: 1VJ RUNNING PROBLEMS

When it does it again, try easystart to see if it's electrical or fuel.
Could be fuel supply getting hot past the tank to pump lines.
Could be carb not set up correctly.
Could be a fault in the stator, the windings for spark generation. Test the circuits next time it does it and still hot.
Had a ...
by donnybach
Wed Jun 17, 2026 6:53 pm
Forum: The XT600Z 3AJ Ténéré Forum
Topic: Clutch Kit for 3AJ
Replies: 3
Views: 4249

Re: Clutch Kit for 3AJ

Yup, ebc