Choke mechanism

Airbox, Fuelpump, Carburettor
Post Reply
Yami
Financial
Financial
Posts: 469
Joined: Sun Apr 07, 2013 9:18 am
What Bike or Bikes Do You Own?: Many
Previously Owned Bikes: To many
Location: Helsingborg, Sweden

Choke mechanism

Post by Yami » Thu May 10, 2018 11:54 am

The choke arm is stuck in "full choke". Can´t press it in at all.
Losened the screw that attach to the carb and can see a little washer attached to the arm down the hole.
Seemes very difficult getting in there and losen that one. How does it work in there, what should move?

Image
Current in the stable: 2x34L, 36A, 59X, 43F, 2KF, Raptor 350, R6, R1 and a GL1800

User avatar
Mezo
Dashingly Handsome
Dashingly Handsome
Posts: 5158
Joined: Wed Mar 23, 2011 11:01 am
What Bike or Bikes Do You Own?: XT600Z 3AJ
Previously Owned Bikes: Honda SS50, Suzuki TS50, Honda CB100, Honda CR125RZ, Yamaha YZ125, Kawasaki KX250, Suzuki TL1000S, Ducati 900SS, Ducati 900SL, a few Tenere`s.
Location: KYOGLE
Contact:

Re: Choke mechanism

Post by Mezo » Fri May 11, 2018 12:34 am

Squirt some penetrating fluid in there.

Mezo.

Yami
Financial
Financial
Posts: 469
Joined: Sun Apr 07, 2013 9:18 am
What Bike or Bikes Do You Own?: Many
Previously Owned Bikes: To many
Location: Helsingborg, Sweden

Re: Choke mechanism

Post by Yami » Fri May 11, 2018 9:59 am

Mezo wrote:
Fri May 11, 2018 12:34 am
Squirt some penetrating fluid in there.

Mezo.
First I did, and a lot of it. smile:
Should the "arm-packet" be drawn out or turned out?
Current in the stable: 2x34L, 36A, 59X, 43F, 2KF, Raptor 350, R6, R1 and a GL1800

Yami
Financial
Financial
Posts: 469
Joined: Sun Apr 07, 2013 9:18 am
What Bike or Bikes Do You Own?: Many
Previously Owned Bikes: To many
Location: Helsingborg, Sweden

Re: Choke mechanism

Post by Yami » Fri May 11, 2018 5:53 pm

It was drawn out. Needed a lot of force and it popped right out. smile:
Current in the stable: 2x34L, 36A, 59X, 43F, 2KF, Raptor 350, R6, R1 and a GL1800

Post Reply